Various Types Of Stage Lights Are Often Used

Various Types Of Stage Lights Are Often Used

Are you interested in knowing the world of stage lighting but are confused with so many models, types, prices, features, and don’t know where to start?

The following is brief information that will help introduce you to the world of stage lighting or better known in Indonesia as ‘stage lights.’ Let’s start by knowing various lighting groups and different types of stage lighting.

Based on the type of equipment/housing

# PAR

PAR / PARcan (short for Parabolic Aluminized Reflector), is standard equipment in stage lighting. In general, PAR is a static/immovable equipment, which shoots light/light without a clear boundary, and acts as an ambient/flood light to fill the entire room and produce certain conditions.

# Bar

The fixture bar is similar to PAR, which is useful for filling the room with light, but has a linear (rod) format that extends, as long as the results of the fire shot are more even and not centered or oval like in PAR.

# Panel

Fixture panel, as the name implies has a format in the form of groups, most of the surface emits light. Some panels are used as washers/floods, to produce the most even glow in the room, and there are also panels that are modular (can be connected into larger groups).

This is great), and is useful as a substitute for giant video/lighting screens and can be programmed with pixel mapping.

# Pinspot

Pinspot is a device that has small dimensions, which are usually installed in large numbers, and are easily mounted to many positions, and shoot light points.

# Cannon

Cannon is small equipment and often has the task of producing a centralized beam with large output to give air effect to light shows. Usually having a low beam angle is not like PAR, but also has no clear boundaries like spotlights.

# Middle part

The center is sullen in all fixture that is often placed in the middle of the room so that it can be watched from various sides and also emits light in all directions with the widest beam angle. The center can be a fixture like a dome like a mirror ball which often gives the effect of a moonflower or even a moving head that fires various types of lighting effects in all directions.

# Head moving

Moving heads, among those you often encounter next to PAR, is equipment that has a head/head that can run because there is a motor in it that controls the position, direction, and speed of movement.

# Scanner

The scanner is all equipment that has the same benefits as a moving head, which is photographing light that moves in all directions. But unlike the flying head, the scanner does not touch the head/head of the lamp but moves the mirror/mirror that reflects light on it. Because mirrors only drive it, scanners can usually reflect light much faster, but have a narrower beam angle, and are often cheaper.

# Follow the Spot

Follow spots are equipment that shoots light with a prodigious output (usually in the form of spotlights), which can be operated manually with operator lighting. Usually, follow spots are used to highlight certain images/objects on the stage so that the entire audience concentrates on the highlighted object.

# Projector

The projector is all equipment in charge of projecting images/motifs/ animations that can be changed, including Gobo and laser projectors.

# Decorative

Decorative fixture often refers to the entire installation which acts as an ornament to make the atmosphere more lively. This decorative lighting can be anything and comes in various forms.

Based on the type of beam produced

There are many categories of stage lighting according to the beam/light produced. Among them:

# Wash / Flood

Wash or flood is a light with a uniform distribution and fluorescent nature. Usually obtained by PAR fixture, bar, or panel, and there is also a number in the form of a moving head. This type of lighting is often used to fill the room and submit background conditions. Blitz/strobe is also included in the wash, but it only fires light with the duration of the shortest period/flashing.

# Spot Light

Spotlights or known as the spotlight is a type of light with relatively high intensity, and the direction of lighting is focused on a specific location with clear boundaries. This irradiation aims to give accent to an object with the highlighting technique. Another function is to deliver aerial beam effects if fired into the ceiling in situations where not a few particles are flying in the air.

# Gobo

Gobo is a spotlight paired with a metal plate that has a specific motif in front of the lens to the point of producing an exciting motif/image. Gobo projector can also be paired with a theme in the form of a logo with a destination promoting something.

# Moonflower

Moonflower is a colorful light effect that moves a specific pattern, and its spread in all directions so that it fills the room with that effect. Usually used in dark spaces like karaoke rooms, cafes/restaurants, clubs, dance floors, or any stage.

# Laser

Lasers are like those that are not uncommon in clubs and large events/concerts, where light is obtained using laser technology. Lasers are light that has the highest intensity but are fired at the most top speed and are most focused on one point. In the space passed, the laser can deliver the most stunning aerial effect, while the object being fired, the laser can produce images or even animation when burned at high scanning speeds.

# Pixel

Pixel lighting is the light obtained in a lighting fixture that is often a LED panel or rod consisting of rows of lights inside. These pixels can then be programmed to produce individual images/animations when watched from a distance. The monitor and television screen consists of the densest pixel of light.

Based on the type of light bulb (bulb)

There are many types of light bulbs used in lighting fixtures.

Among them are HID (High-Intensity Discharge), HIR (Infrared Halogen), and the most recent is LED (Light Emitting Diode). Compared to Discharge and Halogen lamps, LED technology has many advantages including the most extended lamp life (20,000-30,000 hours), does not require time for cooling down like Discharge, and does not issue excessive heat like Halogen.

Along with the growth of technology, LED itself has experienced no small changes. Lighting can also be separated according to the control technique. Some are non-DMX, DMX, and so on.

If you have a lighting project that you want to work on but are confused about where to start, please contact us for more information. We can also help procure many kinds of lighting needs from the American DJ brand (entry-mid size venue and indoor), Elation Lighting (pro and outdoor), X-Laser (programmable laser), along with applications and lighting controllers like Hog (lighting console hardware ), Arkaos (video and lighting software), and Pangolin (laser show software).

5 Benefits of LED Lights That Yet People Know

5 Benefits of LED Lights That Yet People Know

When going to choose lights to illuminate the house, not a few who recommend picking LED lights, when compared to a bulb lamp, this type of LED is more expensive.

Unbeknownst to it, it turns out that there are not a few uses of LED lights that can be experienced by homeowners. Here are five of them.

# 1 Save Energy and Cheap

If you are wondering about the use of LED lights, then the following will be heard very often:

LED lights are familiar with the energy efficient nature. You need to know, and the LED lights only use 1/30 of the average energy required by a bulb. The next thing that then makes this one lamp not too consuming energy and helps save electricity costs.

# 2 Smaller Size

Other characteristics of LED lights that are no less beneficial are the sizes of each of the lights. This lamp is the smallest to the point where it can be used in a location or room that ordinary bulbs cannot enter. The size of LED lights often ranges from 3 to 8 mm. These lights can also be used individually or in series. Besides, the LED light emits a specific view to the point where it doesn’t emit too much heat.

# 3 Benefits of LED Lights: Durable

Other unique facts about the use of LED lights are their use which is quite long and durable. Mentioned, this lamp can last up to 30 thousand to 50 thousand hours of use. When this usage is much longer compared to the ordinary bulb which can only be used around 1,000 – 2,000 hours of usage. While the CFL lamp (fluorescent) which is claimed to be durable also can only be lit for 8 thousand – 10 thousand hours. This is why LED lights can make you save not a little money even if you have to pay for it in advance.

# 4 Not Hot

As pronounced on the first point, the LED lights have a focused direction. Also, this lamp also does not emit heat into the room. Ordinary bulb lights not only emit light but even go away. As much as 90% of his energy goes home to heat, and the matter is very futile. On the other hand, the fluorescent lamp emits 80% of its energy into heat. While the LED lights remain cool to the point that the energy is the most efficient.

# 5 Emitting White Light

Each type of lamp has a different beam of light. For example, the light bulb has a warm yellow color while Fluorescent lights have sits that want blue or green so that the atmosphere of the room becomes cold. Furthermore, LED lights produce a perfect white light so that lighting in the living room becomes more real.

Its quality highly provoked the versatility of the LED lights above. If the lamp is designed with poor quality, then all the benefits cannot be appropriately felt. LED lights also become inefficient, not durable, maybe even make you spend not a little money. Therefore, make sure you check the quality of the LED lights before buying it!

Hopefully the discussion above works for you.