Author: Alberto Mckinney

So That The Bulb is Durable, Follow These Tips and Tricks

So That The Bulb is Durable, Follow These Tips and Tricks

Wherever you are, I and you always find a light bulb that illuminates our days.

The lamp bulb is undeniably functioning as a source of light that helps us complete each day’s work. If the light bulb is not there, you will feel the trouble of digging for a replacement like relying on a light that has an unstable light – the light is often dim.

Do you know how the bulb lights up? The lamp lights up with an electric current that delivers power to the lamp to the point where light appears in the bulb. So from that, the durability of the bulb depends on the amount of energy or electricity flowing and the quality of the lamp itself. It’s best to choose a light, choose one that has weight | weighted | good quality or who have SNI standards.

The durability of the bulb certainly makes you live more practical because you will not spend a little time trying to replace the lamp for a stable, brightly lit source of lighting. Do you want to know the technique of caring for a lamp to keep it durable? In this article, Sepulsa will discuss the method of maintaining a light bulb that is durable. Not just a home light bulb, including even a motorcycle light bulb that usually illuminates your path at night.

Care for a durable lamp bulb

Home Light Bulb

First, we will discuss how to guard a home light bulb. You know not a lot of light bulbs that you need to light up the house. Imagine if you use a light bulb that is not standardized, then you will have to replace it continuously. Aside from the quality of the lamp, as for some things, you must pay attention to how to keep the light bulb durable.

• To keep the lights on for longer, you try to use the lamp to match the voltage and currently listed on the lamp. If you use more energy than you should, the bulb will go out quickly.
• The voltage at the residence location should be kept stable and routinely checked with a voltage meter. If your electricity is not permanent according to information from the voltage meter, you can overcome it by installing ground in the electrical installation that is connected with a negative / zero cable.
• Perform a simple check, try to turn on the television and lights. If the light blinks, there is a problem with electricity. Check all electrical installation cable connections. If there is loose material, it should be immediately tightened and then handed over to the duct tape to be safe.
• Check the size of the cable. Make sure the attached cable matches the power available.
– If the electrical energy in residence is 450 VA-1300 VA, at least the main line is the cable size of 1.5mm.
– Electricity 2200 VA – 3500 VA, at least the main front is 2.5mm cable size.
– Electricity 4400 VA – 5500 VA, at least the mainline 4mm cable size.
• Check the current distribution on the MCB (Mini Circuit Breaker). If one line is used for a large number of devices, then you must increase the MCB again. One MCB is good for 6 instruments.
• Finally, you should not forget to check the electrical installation. Make sure the power lines use 3 lines, namely plus, minus, and ground. The three lines must take place individually. Even better if you add a resistor to the lamp device where you live at the residence so that it can work more optimally.

Motorbike Light Bulb

When you drive at night, of course, you need a lamp to help you drive until you safely reach your destination. You should not be lazy to check the light bulb of a motorbike; it seems trivial but plays a significant role when you drive.
The motorbike light bulb has two filaments, the main lamp (short range) and the dimmer. For those of you motorists, you certainly know the benefits of dimmers. A useful dimmer provides a sign or signal for the driver and has a higher bias light than the leading light.

How to make a durable bulb on a motorbike be handled by listening to the time and type of use of the lamp. The thing you can do to guard a long-lasting bulb is to use dimmer lights during the day. Then at night, you can use the leading lights (close lights).

How To Make Hanging Decorative Lights From Used Goods

How To Make Hanging Decorative Lights From Used Goods

For those who are familiar with upcycling or recycling used goods to be something new, of course, it is no stranger to the many decorative elements of living locations that can be made using this method.

How to create hanging decorative lights from used goods is one of them.

The upcycle or recycle method is an original proposal to use unused merchandise, or even once garbage becomes something that has a return value. Also in many situations, it has become a trend thanks to its attractive and aesthetic appearance.

The high quality of accessories and various elements of home decoration also drives these creative ways increasingly popular. DIY or do it yourself is not the least done by all residential owners to get a stylish appearance in their spaces without losing function.

Therefore, why not try many simple ideas and you can do this yourself for the needs of room decoration at home, beautiful hanging lamps from used goods that look no less trendy with decorative lamp models fabricated from famous brands. The following are many tips and tricks for making hanging decorative lights from used products quoted from many sources;

# Light Pendant Globe

The Light Pendant Globe is the unique hanging lamp. Launching apartment therapy, the technique of making it is quite easy, it only takes 10 minutes with a cost of no more than 150 thousand rupiahs.

# Mason Jar Pendant Light

Decorative Mason jar chandelier is one of the most popular decorative lights. This mason jar pendant light has a unique and unique appearance of attention. Usually, not a little used in commercial areas or spaces such as cafes or co-working space with vintage-industrial interior style, but you can use it or make it use the area or space in your location to make it more attractive and memorable.

# Tin Can Pendant Light

This is the unique and vintage style decorative lighting model. Used cars that are often scattered everywhere, we should not rush to throw away. You can turn used cans into beautiful aesthetic decorative lamps. This decorative lamp model of used goods is very suitable for outdoor locations, like a garden or facade area that will add to the charm of your home.

# DIY Pendant Light Cardboard

The cardboard pendant light is the most genius technique for processing used cardboard with cheap methods with luxurious results. This hanging decorative lamp looks the most stylish and expressive.

# Light Pendant Rope Woven

Hanging decorative lights with ornate straps can also be among the unique decorative elements of space. Woven rope pendant light shows how creative you are when dealing with used items and interior decoration.

That is many hanging decorative lighting models that you can make by using used merchandise. Remember, you shouldn’t spend too little money on lighting and lighting, said the DIY network. Learn techniques for making hanging decorative lights from used goods by way of the up cycle to get an exciting and memorable interior visualization at the location of your stay. Dare to try?

How to Choose the Right Garden Light

How to Choose the Right Garden Light

Houses that have a garden will undoubtedly be maintained its beauty and among the furniture or decorations that can beautify this garden is a garden light.

Now there are not a few lights for a more minimalist garden and can make the garden more aesthetic and beautiful.

When planting these lights, we have to do so many things. Lying must be carried out properly so that later the lighting and beauty of the lamps will be right. If your laying isn’t working correctly enough, your garden will look the most horrible so that your garden lights look beautiful.

The first thing that we must consider is the layout of the lights. The design of the views is the thing you have to look at when setting up the park. Put the lights in the areas that you want to light so that the benefits of the views will be even more optimal. For its location,

You can use it in the middle of the park, try the lights that we put in the middle have more size and have bright colors.

Place lights on thick plants or in front of plants. We can also put some small lights between the location fence and the garden with views facing the plants.

Second, the type of lamp we use. So that your garden is not infrequently bright, try to choose the kind of light that is the least and is resistant to water due to its location being outside.

Try to choose a lamp that is waterproof, because if the rainy season hit, there will not be a problem in your lights after all if there is a fountain or fish pond in the park. In choosing the type of lamp must be considered, when this has been so not a few lights that are waterproof.

Third, choose a garden lamp that has a low voltage. As minimalist lighting, you better use low voltage. You can use this low voltage as security after all if you plant lights near the pool.

In addition to safety, this low voltage lamp will save our electricity consumption at home. Don’t let it go solely because for the sake of home decoration, and then you neglect your electricity savings bill.

Fourth, cable selection. Cables are so urgent for the lights, caused without wires. The lights cannot live. The cable will run electricity and will create lights in our garden.

We also have to pay attention to the laying of the cable, and it should not always go down because the wiring is not quite right, the cable will cause danger. We can plant cables behind a living location or also on the ground.

If your garden is small and small, you can use fiber cables, so you don’t need to adjust the wires a bit to suit your needs.

Finally, where is the location to place this garden light? Because the site is outside your space automatically when daylight will be exposed to sunlight, an urgent matter for security is where we put the lights.

For your location, you must choose a place that is resistant to heat and water so that the lights last in addition to installing lights in areas that are easier to maintain. Do not let you put the lights on a location that can cause danger.

One of the most important matters, when you install a lamp in a garden, is to make sure the existence of the light will not pose a danger to people who are around it.

Various Types Of Stage Lights Are Often Used

Various Types Of Stage Lights Are Often Used

Are you interested in knowing the world of stage lighting but are confused with so many models, types, prices, features, and don’t know where to start?

The following is brief information that will help introduce you to the world of stage lighting or better known in Indonesia as ‘stage lights.’ Let’s start by knowing various lighting groups and different types of stage lighting.

Based on the type of equipment/housing

# PAR

PAR / PARcan (short for Parabolic Aluminized Reflector), is standard equipment in stage lighting. In general, PAR is a static/immovable equipment, which shoots light/light without a clear boundary, and acts as an ambient/flood light to fill the entire room and produce certain conditions.

# Bar

The fixture bar is similar to PAR, which is useful for filling the room with light, but has a linear (rod) format that extends, as long as the results of the fire shot are more even and not centered or oval like in PAR.

# Panel

Fixture panel, as the name implies has a format in the form of groups, most of the surface emits light. Some panels are used as washers/floods, to produce the most even glow in the room, and there are also panels that are modular (can be connected into larger groups).

This is great), and is useful as a substitute for giant video/lighting screens and can be programmed with pixel mapping.

# Pinspot

Pinspot is a device that has small dimensions, which are usually installed in large numbers, and are easily mounted to many positions, and shoot light points.

# Cannon

Cannon is small equipment and often has the task of producing a centralized beam with large output to give air effect to light shows. Usually having a low beam angle is not like PAR, but also has no clear boundaries like spotlights.

# Middle part

The center is sullen in all fixture that is often placed in the middle of the room so that it can be watched from various sides and also emits light in all directions with the widest beam angle. The center can be a fixture like a dome like a mirror ball which often gives the effect of a moonflower or even a moving head that fires various types of lighting effects in all directions.

# Head moving

Moving heads, among those you often encounter next to PAR, is equipment that has a head/head that can run because there is a motor in it that controls the position, direction, and speed of movement.

# Scanner

The scanner is all equipment that has the same benefits as a moving head, which is photographing light that moves in all directions. But unlike the flying head, the scanner does not touch the head/head of the lamp but moves the mirror/mirror that reflects light on it. Because mirrors only drive it, scanners can usually reflect light much faster, but have a narrower beam angle, and are often cheaper.

# Follow the Spot

Follow spots are equipment that shoots light with a prodigious output (usually in the form of spotlights), which can be operated manually with operator lighting. Usually, follow spots are used to highlight certain images/objects on the stage so that the entire audience concentrates on the highlighted object.

# Projector

The projector is all equipment in charge of projecting images/motifs/ animations that can be changed, including Gobo and laser projectors.

# Decorative

Decorative fixture often refers to the entire installation which acts as an ornament to make the atmosphere more lively. This decorative lighting can be anything and comes in various forms.

Based on the type of beam produced

There are many categories of stage lighting according to the beam/light produced. Among them:

# Wash / Flood

Wash or flood is a light with a uniform distribution and fluorescent nature. Usually obtained by PAR fixture, bar, or panel, and there is also a number in the form of a moving head. This type of lighting is often used to fill the room and submit background conditions. Blitz/strobe is also included in the wash, but it only fires light with the duration of the shortest period/flashing.

# Spot Light

Spotlights or known as the spotlight is a type of light with relatively high intensity, and the direction of lighting is focused on a specific location with clear boundaries. This irradiation aims to give accent to an object with the highlighting technique. Another function is to deliver aerial beam effects if fired into the ceiling in situations where not a few particles are flying in the air.

# Gobo

Gobo is a spotlight paired with a metal plate that has a specific motif in front of the lens to the point of producing an exciting motif/image. Gobo projector can also be paired with a theme in the form of a logo with a destination promoting something.

# Moonflower

Moonflower is a colorful light effect that moves a specific pattern, and its spread in all directions so that it fills the room with that effect. Usually used in dark spaces like karaoke rooms, cafes/restaurants, clubs, dance floors, or any stage.

# Laser

Lasers are like those that are not uncommon in clubs and large events/concerts, where light is obtained using laser technology. Lasers are light that has the highest intensity but are fired at the most top speed and are most focused on one point. In the space passed, the laser can deliver the most stunning aerial effect, while the object being fired, the laser can produce images or even animation when burned at high scanning speeds.

# Pixel

Pixel lighting is the light obtained in a lighting fixture that is often a LED panel or rod consisting of rows of lights inside. These pixels can then be programmed to produce individual images/animations when watched from a distance. The monitor and television screen consists of the densest pixel of light.

Based on the type of light bulb (bulb)

There are many types of light bulbs used in lighting fixtures.

Among them are HID (High-Intensity Discharge), HIR (Infrared Halogen), and the most recent is LED (Light Emitting Diode). Compared to Discharge and Halogen lamps, LED technology has many advantages including the most extended lamp life (20,000-30,000 hours), does not require time for cooling down like Discharge, and does not issue excessive heat like Halogen.

Along with the growth of technology, LED itself has experienced no small changes. Lighting can also be separated according to the control technique. Some are non-DMX, DMX, and so on.

If you have a lighting project that you want to work on but are confused about where to start, please contact us for more information. We can also help procure many kinds of lighting needs from the American DJ brand (entry-mid size venue and indoor), Elation Lighting (pro and outdoor), X-Laser (programmable laser), along with applications and lighting controllers like Hog (lighting console hardware ), Arkaos (video and lighting software), and Pangolin (laser show software).

5 Benefits of LED Lights That Yet People Know

5 Benefits of LED Lights That Yet People Know

When going to choose lights to illuminate the house, not a few who recommend picking LED lights, when compared to a bulb lamp, this type of LED is more expensive.

Unbeknownst to it, it turns out that there are not a few uses of LED lights that can be experienced by homeowners. Here are five of them.

# 1 Save Energy and Cheap

If you are wondering about the use of LED lights, then the following will be heard very often:

LED lights are familiar with the energy efficient nature. You need to know, and the LED lights only use 1/30 of the average energy required by a bulb. The next thing that then makes this one lamp not too consuming energy and helps save electricity costs.

# 2 Smaller Size

Other characteristics of LED lights that are no less beneficial are the sizes of each of the lights. This lamp is the smallest to the point where it can be used in a location or room that ordinary bulbs cannot enter. The size of LED lights often ranges from 3 to 8 mm. These lights can also be used individually or in series. Besides, the LED light emits a specific view to the point where it doesn’t emit too much heat.

# 3 Benefits of LED Lights: Durable

Other unique facts about the use of LED lights are their use which is quite long and durable. Mentioned, this lamp can last up to 30 thousand to 50 thousand hours of use. When this usage is much longer compared to the ordinary bulb which can only be used around 1,000 – 2,000 hours of usage. While the CFL lamp (fluorescent) which is claimed to be durable also can only be lit for 8 thousand – 10 thousand hours. This is why LED lights can make you save not a little money even if you have to pay for it in advance.

# 4 Not Hot

As pronounced on the first point, the LED lights have a focused direction. Also, this lamp also does not emit heat into the room. Ordinary bulb lights not only emit light but even go away. As much as 90% of his energy goes home to heat, and the matter is very futile. On the other hand, the fluorescent lamp emits 80% of its energy into heat. While the LED lights remain cool to the point that the energy is the most efficient.

# 5 Emitting White Light

Each type of lamp has a different beam of light. For example, the light bulb has a warm yellow color while Fluorescent lights have sits that want blue or green so that the atmosphere of the room becomes cold. Furthermore, LED lights produce a perfect white light so that lighting in the living room becomes more real.

Its quality highly provoked the versatility of the LED lights above. If the lamp is designed with poor quality, then all the benefits cannot be appropriately felt. LED lights also become inefficient, not durable, maybe even make you spend not a little money. Therefore, make sure you check the quality of the LED lights before buying it!

Hopefully the discussion above works for you.